Selecting A Setting For Oversized Paper (Wide Paper Settings) - Oce cm3522 User Manual

Copy paper/originals
Using the keyboard that appears, type in the name of the key, touch [OK], and then touch [Close]. For
details on typing in text, refer to
7
Touch [OK], and then touch [OK] in the next three screens that appear.
The Basic screen appears again.
6.2.5

Selecting a setting for oversized paper (Wide Paper settings)

Wide paper can be loaded into tray 1/2/3/4or the bypass tray.
Wide paper is a size larger than the standard size and allows copies of standard-sized originals to be printed
so that there is no loss at the edges. For example, if 11 × 17 wide paper is used, an area up to 12-1/4 × 18
can be printed, allowing the entire area of an 11 × 17-size original to be printed.
If wide paper is loaded, it will be necessary to enter the paper size.
The following procedure describes how to specify the setting for wide paper loaded into the bypass tray.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for the bypass tray.
Océ cm3522/cm2522
"Entering text" on page 12-2.
6
6-13