Precautions For Paper - Oce cm3522 User Manual

Copy paper/originals
Paper type
Thick 1
Thick 2
Thick 3
Thick 4
Envelopes
Duplex 2nd
Side
6.1.4

Precautions for paper

Do not use the following types of paper.
Otherwise, decreased print quality, paper misfeeds or damage may result.
- OHP transparencies that have already been fed through the machine (even if the transparency is still
blank)
- Paper that has been printed on with a heat-transfer printer or an inkjet printer
- Paper that is either extremely thick or extremely thin
- Folded, curled, wrinkled, or torn paper
- Paper that has been left unwrapped for a long period of time
- Damp paper, perforated paper, or paper with punched holes
- Extremely smooth or extremely rough paper, or paper with an uneven surface
- Paper that has been treated, such as carbon-backed, heat-sensitive or pressure-sensitive paper
- Paper that has been decorated with foil or embossing
- Paper of a non-standard shape (not rectangular)
- Paper that is bound with glue, staples or paper clips
- Paper with labels attached
- Paper with ribbons, hooks, buttons, etc., attached
Océ cm3522/cm2522
Icon
Plain Pa-
per
Thick 1
Thick 2
Thick 3
Thick 4
Descriptions
Select this setting when the thick paper that is loaded has a weight of
24-1/4 lb to 39-7/8 lb.
A paper tray with this setting is not automatically selected when the
"Auto" Paper setting is specified.
Select this setting when the thick paper that is loaded has a weight of
40-3/16 lb to 55-1/2 lb.
A paper tray with this setting is not automatically selected when the
"Auto" Paper setting is specified.
Select this setting when the thick paper that is loaded has a weight of
55-3/4 lb to 68 lb.
A paper tray with this setting is not automatically selected when the
"Auto" Paper setting is specified.
Select this setting when the thick paper that is loaded has a weight of
68-1/4 lb to 72-1/16 lb.
A paper tray with this setting is not automatically selected when the
"Auto" Paper setting is specified.
Select these settings when envelopes are loaded.
A paper tray with this setting is not automatically selected when the
"Auto" Paper setting is specified.
Select these settings when loading paper that has already been printed
on one side.
"2nd Side" can be selected only if plain paper, thick paper 1, thick pa-
per 2, thick paper 3 or thick paper 4 is loaded in the bypass tray.
6
6-4