Oce cm3522 User Manual page 496

Utility mode
– If the lines are shifted in the X direction as shown below, touch [-] under "X" to reduce the
adjustment.
– Each time [+] or [-] is touched, the value is increased or decreased by one increment.
– A range between -6 dots and 6 dots is available for
setting.
– If the lines are shifted in the X direction as shown
below, touch [+] under "X" to increase the
adjustment.
– If the lines are shifted in the Y direction as shown
below, touch [-] under "Y" to reduce the adjustment.
– If the lines are shifted in the Y direction as shown
below, touch [+] under "Y" to increase the
adjustment.
– If the lines are not shifted from the reference lines, continue with step 10.
9
Press the [Start] key.
– The adjustment is applied when the [Start] key is pressed. To cancel the adjustment, press the
[Reset] key instead of pressing the [Start] key.
The adjusted test pattern is printed.
10
Check the print result.
Océ cm3522/cm2522
11
11-57