Application functions
!
Detail
The specified paper can be inserted at a maximum of 30 locations within an original of up to 999 pages.
In double-sided originals, one double-sided page is considered to be two pages (one for the front and
one for the back).
1
Position the original to be copied.
–
For details on positioning the original, refer to
–
For an original that exceeds 100 pages, refer to
("Separate Scan" setting)" on page
2
Load the paper to be used for the insertions sheets and the main body of the original into the desired
paper trays.
–
Use paper with the same size for the insertion sheets and for the main body of the original, and load
them in the same orientation.
–
To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
3
Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
–
For details on using thick paper for the insertion sheets and on loading the paper, refer to
types and paper capacities" on page 6-3
page
–
To cancel the setting and select the default, press the [Reset] key.
The Sheet/Cover/Chapter Insert screen appears.
Océ cm3522/cm2522
1-45.
"Feeding the original" on page
"Scanning the original in separate batches
2-9.
and
"Loading paper into the bypass tray" on
7
2-6.
"Paper
7-27