Oce cm3522 User Manual page 65

Before making copies
– Load letterhead paper so that the side to be printed on faces down.
– To print on OHP transparencies, thick paper 4,
envelopes or postcards, use the bypass tray.
How is curled paper loaded?
?
% Flatten the paper before loading it.
4
Load the paper into the left side of the LCT so that the
side of the paper to be printed on (the side facing up
when the package was unwrapped) faces up.
5
Close the LCT.
– If special paper is loaded, the paper type setting must be specified. For details, refer to
a setting for special paper" on page
Reminder
Be careful not to touch the film.
Do not load so many sheets of paper that the top of the stack is higher than the , mark.
For details on the paper that can be loaded into the LCT, refer to
Note
If the machine has entered Low Power mode or Sleep mode, the LCT cannot be pulled out, even after
the tray release button is pressed. Be sure to first cancel Low Power mode or Sleep mode.
Océ cm3522/cm2522
, mark
6-15.
"Copy paper" on page
D C B A
"Specifying
6-2.
1
1-44