Oce cm3522 User Manual page 136

Basic copy operations
– When the "2 Position" Staple setting is selected.
– When the "Corner" Staple setting is selected.
– Touch [Auto] to automatically determine the stapling position according to the orientation of the
loaded original. If the original length is 11-11/16 inch or less, the long side of the paper is stapled.
If the original length is more than 11-11/16 inch, the short side of the paper is stapled.
– If "Auto" is selected for the stapling position, load the original with the top toward the back of the
machine. If the original is loaded in any other orientation, the stapling will not be correctly
positioned.
– If "Auto" is selected, the stapling position is set at the top or at the left.
– To cancel the setting and select the default, press the [Reset] key.
4
If desired, touch [Original Direction], and then select the setting appropriate for the original.
– For details on specifying the original orientation, refer to
(Original Direction settings)" on page
5
Touch [OK].
The Basic screen appears again.
Océ cm3522/cm2522
"Selecting the original orientation
2-21.
2
2-67