Oce cm3522 User Manual page 24

Before making copies
No. Part name
9 Image controller 9839
10 Desk 9354
11 Paper feed cabinet 9351
12 Paper feed cabinet 9352
13 Paper feed cabinet 9353
14 Finisher 9356
15 Output tray cm5520020
16 Mailbin kit
17 Saddle stitcher 9822
18 Punch kit 9357
19 Finisher 9355
20 Punch kit
21 Job separator cm2500200
22 Local interface kit
cm5520080
23 Fax kit cm3500210
24 Scan accelerator kit
cm5520060
25 Fax multi line cm3500220
26 Video interface kit
cm5520070
27 Stamp unit
28 Security kit cm3500260
29 Assist handle
*1
Parts marked with an asterisk are to be installed to the mount kit, and therefore are not shown in the
illustration.
*2
Parts marked with an asterisk are internal options and therefore are not shown in the illustration.
*3
Parts marked with an asterisk are not shown in the illustration.
Océ cm3522/cm2522
Description
The external image controller connecting to Océ cm3522/cm2522.
Allows this machine to be used as a color printer configured into a computer
network. For details, refer to the corresponding User's Guide.
!
Detail
To install the image controller, any of the desk, LCT, single paper feed cab-
inet, or double paper feed cabinet must be installed to the machine.
Allows this machine to be set up on the floor.
Referred to as the "desk" throughout the manual.
The top tray can be loaded with up to 500 sheets of paper, and the bottom tray
can be used as storage.
Referred to as the "single paper feed cabinet" throughout the manual.
Both the top and bottom trays can each be loaded with up to 500 sheets of
paper.
Referred to as the "double paper feed cabinet" throughout the manual.
Can be loaded with up to 2,500 sheets of paper.
Referred to as the "LCT" throughout the manual.
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by pages), Staple settings ("Corner" and "2 posi-
tion") Center Staple setting, and Half-Fold setting are available.
Installed onto finisher 9356 to divide printed pages.
Referred to as the "output tray" throughout the manual.
Installed onto finisher 9356 to divide printed pages (only with computer print-
ing) and feed them into the appropriate tray assigned to a specific individual or
group. Collects printed pages.
Referred to as the "mailbin kit" throughout the manual.
Installed onto finisher 9356 so that copies can be bound or folded at the cent-
er.
Referred to as the "saddle stitcher" throughout the manual.
Installed onto finisher 9356 to allow hole punching to be used.
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by pages), Staple settings ("Corner" and "2 posi-
tion") , and Center Staple & Fold setting are available.
!
Detail
To install the finisher, any of the desk, LCT, single paper feed cabinet, or
double paper feed cabinet must be installed to the machine.
Installed onto finisher 9355 to allow hole punching to be used.
Installed onto the output tray to divide printed pages.
Referred to as the "separator" throughout the manual.
Used for connecting the authentication unit (biometric type), the authentication
*1
unit (IC card type), the JScribe IC card reader/writer and external memory
(USB memory).
*1
Allows this machine to be used as a fax machine.
Creates images at high speed when sending scans.
*1
Installed to increase the telephone lines available for faxing.
Used for connecting the image controller to the Océ cm3522/cm2522.
*2
*2
Applies a stamp to originals that have been scanned.
For details, refer to the User's Guide [Network scan/Fax/Network Fax Opera-
tions].
*1
Installed to encode the data saved on the hard disk so that the hard disk can
be used more safely.
*3
Used when closing the original cover or ADF.
1
1-3