Copy paper/originals
2
Select the button for the bypass tray.
3
Touch [Change Tray Settings].
4
Touch [Standard Size].
The Standard Size screen appears.
5
Touch [↓] twice, and then touch [4 × 6 w].
–
Touch [↑] and [↓] until the button for the desired paper size is displayed.
–
If "4 × 6 w" is selected, "Thick 3" is automatically selected. If paper other than postcards are loaded,
change the paper type setting. For details on the paper type settings, refer to
for special paper" on page
6
Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
The paper size for the bypass tray is set.
Océ cm3522/cm2522
6-15.
6
"Specifying a setting
6-8