Oce cm3522 User Manual page 353

Application functions
? What happens when [Frame] is selected?
% The same width is erased on all four sides of the original. The factory default setting is "Frame".
Can the settings be combined?
?
% "Frame" cannot be combined with the other settings ("Top", "Left", "Right" or "Bottom").
4
Touch [<->] to switch between the integer and the fraction, and then touch [–] and [+] to specify the
width to be erased.
– To specify a different width to be erased depending on the position, specify different settings for
"Top", "Left", "Right", and "Bottom".
– When using the keypad to specify the settings, press the [C] (clear) key, and then specify the setting.
– If a decimal value is displayed in the screen, press the [C] (clear) key, and then use the keypad to
type in the setting. For details on switching between decimal and fraction values, refer to
Settings" on page
– If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key
to erase the value, and then specify the correct value.
5
Touch [OK].
6
Specify any other desired copy settings.
7
Using the keypad, type in the desired number of copies.
8
Press the [Start] key.
Océ cm3522/cm2522
11-15.
7
"System
7-76