Oce cm3522 User Manual page 455

Utility mode
Note
[Low Power Mode Settings] appears only if the "Administrator Security Levels" parameter in
Administrator mode is set to [Level 1], [Level 2].
!
Detail
For details on the "Administrator Security Levels" parameter, refer to
page 11-32.
Output Settings
Parameter
Print/Fax Output Settings
Output Tray Setting
Bin Assignment
1
* If optional separator is installed, "Tray 2" is selected as the factory default.
2
* If optional separator is installed, "Tray 1" is selected as the factory default.
Note
The "Output Tray Settings" parameter is available only if the optional finisher 9356 or separetor is
installed.
When an additional output tray is installed on finisher 9356, the additional output tray is assigned as
Tray 2, and Tray 2 is assigned as Tray 3, in "Output Tray Setting".
[Bin Assignment] only appears if the optional mailbin kit is installed on finisher 9356.
The "Bin Assignment" parameter is set to "Tray 2" only if the optional output tray is installed on finisher
9356.
AE Level Adjustment
Description
Specify the initial value for auto exposure. The higher the setting, the more that the orig-
inal background is emphasized.
Auto Paper Select for Small Original
Description
Select whether copying is permitted when the "Auto" Paper setting is selected and ei-
ther no original is placed on the original glass or the original placed on the original glass
is too small for its size to be detected.
• Copy on Small Size:
The original size is determined to be 5-1/2 × 8-1/2, and copies are produced on 5-
1/2 × 8-1/2-size paper.
• Copy on Letter:
The original size is determined to be 8-1/2 × 11, and copies are produced on 8-1/2
× 11-size paper.
• Prohibit Copy:
Copies cannot be produced since the original size cannot be detected. Before
pressing the [Start] key, the paper tray (paper to be printed on) must be selected.
Océ cm3522/cm2522
Description
Specify settings for faxing and printing. For details, refer to the User's Guide [Network
Scan/Fax/Network Fax Operations] and the User's Guide [Print Operations].
Select the copy output tray for each
type of job (copies, printouts, re-
ports and faxes).
Select whether or not Tray 1 is
specified as mailbin 5 and the op-
tional output tray is specified as
mailbin 6.
"Security Settings" on
Default Setting
1
Copy: Tray 1*
2
Print: Tray 1*
1
Print Reports: Tray 3*
2
Fax: Tray 3*
Not Set
Default Setting
Standard (2)
Default Setting
Prohibit Copy
11
11-16