Utility mode
–
For uneven printing of the print image, touch [+] to
increase the adjustment.
–
Each time [+] or [–] is touched, the value is increased
or decreased by one increment.
–
To cancel the adjustment, touch [Cancel].
8
Touch [OK].
9
Touch [Exit].
Try performing the copy cycle again.
10
Check the printed image, and finish the adjustment if there are no flaws.
–
If more adjustment is necessary, repeat steps 1 through 9.
–
If the print image flaws are worse, adjust the setting in step 7 in the opposite direction.
Océ cm3522/cm2522
11
ABCDE
ABCDE
ABCDE
ABCDE
ABCDE
11-48