Oce cm3522 User Manual page 362

Application functions
4
Select the desired stamp under "Stamp Type/Preset Stamps" or "Stamp Type/Registered Stamps".
– Touch [↑] or [↓] to display a different list of preset or registered stamps.
– Only one stamp can be selected.
5
Select the desired setting under "Pages".
– To print the stamp only on the front cover, touch [1st Page Only].
– The stamp will not be printed on blank pages inserted using the "Cover Sheet", "Insert Sheet" and
"Chapters" functions.
6
Touch [Print Position], and then select the printing position.
– To make fine adjustments to the printing position, touch [Adjust Position]. Select the desired
direction under "Left & Right Adjustment" or "Top & Bottom Adjustment", touch [´] to switch
between the integer and the fraction, touch [–] and [+] to specify the adjustment amount, and then
touch [OK].
– If a decimal value is displayed in the screen, press the [C] (clear) key, and then use the keypad to
type in the adjustment amount. For details on switching between decimal and fraction values, refer
to
"System Settings" on page
Océ cm3522/cm2522
11-15.
7
7-85