Oce cm3522 User Manual page 86

Basic copy operations
– To specify a standard size, touch the button for the desired original size.
– To specify a custom size, touch [Custom Size] to display the Custom Size screen. Specify the X and
Y sides of the paper, and then touch [OK].
– Touch [X] or [Y], touch [<->] to switch between the integer and the fraction, and then touch [-] and
[+] to specify the size of the paper.
– If a decimal value is displayed in the Custom Size screen, use the keypad to type in the setting. For
details on switching between decimal and fraction values, refer to
page
– If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears. Type a value within the allowable range. If the value was
incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.
– To cancel changes to the settings, touch [Cancel].
– To specify a photo size, touch [Photo Size] to display the Photo Size screen. Touch the button for
the desired original size, and then touch [OK].
The Original Size screen appears again.
Océ cm3522/cm2522
Original Size screen
11-15.
Custom Size screen
Photo Size screen
"System Settings" on
2
2-17