Oce cm3522 User Manual page 334

Application functions
4
Touch [Image Repeat].
– [Booklet Original] appears if optional finisher 9355 is installed or optional finisher 9356 is installed
with the saddle stitcher attached.
The Image Repeat screen appears.
5
Under "Layout", touch [With Margin] or [Without Margin], or touch [2/4/8 Repeat].
– To cancel the "Image Repeat" function, touch [No].
– Touching [2/4/8 Repeat] displays the 2/4/8 Repeat screen, where the number of repeats and the
interval can be selected.
6
Check the scanning size under "Scan Range", touch [OK], and then touch [Close] in the next screen
that appears.
– If the original size does not appear under "Scan Range" or to specify the scanning area, touch [Set
Range], and then specify the scanning area from any of the screens.
Océ cm3522/cm2522
7
7-57