Oce cm3522 User Manual page 437

Managing jobs
2
Select the job to be removed from the Held Jobs list.
– If the job to be removed from the Held Jobs list is not displayed, touch [↑] and [↓] until the desired
job is displayed.
– If an incorrect job was selected, select a different job or touch the button for the selected job again
to deselect it.
– To continue without changing the specified copy settings, continue with step 5.
3
Touch [Change Setting].
The Change Setting screen appears.
4
In the Change Setting screen, change the copy settings as desired, and then touch [OK].
? Is there more information about the settings?
% Refer to the appropriate section.
Can a proof copy be printed?
?
% For details on printing a proof copy, refer to
page
5
In the Release Held Job screen, touch [OK] or press the [Start] key.
The stored job appears in the Current Jobs list and is printed.
How is the removal of a job from the Held Jobs list stopped?
?
% Touch [Cancel].
Océ cm3522/cm2522
10-10.
"Printing a proof copy of a stored job" on
10
10-12