Oce cm3522 User Manual page 338

Application functions
4
Under "Output Size", touch [Image Size], [Paper Size] or [Zoom].
– The factory default setting for the finished size is "17 × 22".
– Touch [Image Size], select the finished image size, and then touch [OK].
– Touch [↑] or [↓] to display a different list of standard sizes.
– If [Custom Size] is touched, the Custom Size screen appears.
Touch [X] or [Y] to, touch [<-->] to switch between the integer and the fraction, and then touch [-]
and [+] to specify the desired value.
– If a decimal value is displayed in the screen, use the keypad to type in the setting. For details on
switching between decimal and fraction values, refer to
– Touch [Paper Size], select the finished paper size, and then touch [OK].
– Touch [↑] or [↓] to display a different list of paper sizes.
Océ cm3522/cm2522
"System Settings" on page
7
11-15.
7-61