Oce cm3522 User Manual page 129

Basic copy operations
Setting
Offset
Center Staple/Fold
Output Tray
Center Staple & Fold
Staple
Punch
The following procedures describe how to select Finishing settings.
Reminder
The Staple settings are available only if the optional finisher is installed.
The Punch settings are available only if the punch kit is installed on the optional finisher.
Océ cm3522/cm2522
Description
If no finisher or separator is in-
stalled.
If the sorting or separator condi-
tions are met, printed copies are
fed out and sorted in an alternat-
ing crisscross pattern.
If a finisher or a separator is in-
stalled.
The copies are fed out and
stacked on top of each other
with each set shifted to separate
it.
Select this setting to fold copies.
The copies are bound with sta-
ples and fed out. The copies can
also be folded and bound with
staples at the same time, and
then fed out.
The "Center Staple/Fold" setting
can be used if the saddle stitch-
er is installed on optional finisher
9356.
Select the output tray where the finished copies are to be fed.
Select this setting to fold the
printed copies and bound them
with staples before feeding them
out.
The "Center Staple & Fold" set-
ting can be used if the optional
finisher 9355 is installed.
Select one of these settings to
bind the copies with a staple in
the corner or with two staples.
Holes are punched (2 or 3 holes)
in the copies for filing them.
1 4
1 2
1 3
4 1
3 1
2 1
1 1
1 4
1 3
1 2
4 1
3 1
2 1
1 1
1
1
2
2-60