Tuning And Storing Fm Radio Stations; Setting The Time Automatically - Grundig M 2300 DAB+ Manual

SETTINGS
Tuning­and­storing­FM­radio­­
stations
You can store up to 40 FM radio stations on pre-
set channels.
1 Switch on the hi-fi system by pressing »
»SOURCE«­on the device or­»FM/DAB« on
the remote control.
2­Select the FM TUNER input source by pressing
»SOURCE« on the device or »FM/DAB« on
the remote control.
Setting­and­storing­FM­radio­
stations­automatically
The device searches for up to 40 stations with
strong reception and stores them automatically.
After the search has finished, you will hear the
station stored at preset 01.
1 Activate the station search by pressing
»PROG« until the frequency display changes
to rapid run-through.
– D isplay: »AUTO«.
Setting­and­storing­FM­radio­­
stations­manually
1 Switch on the hi-fi system by pressing
DAB«.
2­Select the FM input source by pressing »FM/
DAB«.
3 Open the menu by pressing »MENU­
4 Select the » SCAN
» « or » « and press »
3 4
firm.
– D isplay: » ALL «.
Note:­
You can select whether it searches for ra-
7
dio stations with strong reception (display
» STRONG «) or all radio stations (display:
» ALL «).
5 Select the option with »
6 Press »MENU­ « to close the menu.
7
14­ ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
»FM/
«.
7
SET « menu item with
e II­OK« to con-
« or » «.
3 4
7 Set the radio station by pressing and holding
down »
3
– T he radio station search starts and stops at
the next station with a good reception signal;
or
8 «,­
keep pressing »
the frequency you want.
– E ach time you press the button, the frequen-
cy changes by 50 Hz.
8 Save the FM radio station on a preset, to do
this press »PROG«. Select preset with »
oder » « and confirm with »PROG«.
6
Setting­the­time­automatically
The time is updated automatically if a DAB or
RDS radio station transmits a time signal.
Note:
The time must be reset after a power failure
7
or after disconnecting from the mains.
1­Select the DAB input source by pressing
»SOURCE« on the device or »FM/DAB« on
the remote control.
2 Select a DAB radio station by pressing »
» « on the device »
control.
3 Press »INFO« on the remote control to switch
to the time display for the DAB radio station
and confirm the time with »
– D isplay: »CT SYNC«, the time is adopted.
Note:
Some RDS stations (FM radio stations) trans-
7
mit an RDS time signal. If the selected RDS
station transmits time information, the time
can be updated automatically.
In FM tuner mode, press »RDS« repeat-
edly until the time is displayed. If »DATE/
CLOCK« is displayed, the time signal has
not yet been received. Please wait until the
time is displayed.
If the correct time is displayed, press
» e II­OK« to confirm it.
« or » «.
4
« or » « until you reach
3 4
« or » « on the remote
5 6
II­OK«.
e
«
5
« or