Settings; Setting The Time; Setting And Storing Radio Stations - Grundig Vertiga UMS 4600 DEC Manual

SETTINGS

Setting the time

After the first time the hi-fi system is connected to the mains, it switches to stand-by. The time
appears in the display.
1
2
3
4

Setting and storing radio stations

You can store up to 30 stations in the FM (VHF) frequency band and up to 10 stations in the
MW (medium wave) frequency band on preset channel positions.
1
2
3
4
5
6
7
16
_________________________________________________________
In stand-by mode, press »PROGRAM« and hold it down until the display flashes in
24 hour format.
Set the desired format (24 or 12 hour clock) with »
»PROGRAM«.
– Display: the hours flash.
Set the hours with » 5 a
– Display: the minutes flash.
Set the minutes with » 5 a
– Display: the current time.
Note:
The current time is displayed in stand-by mode.
Press »FUNCTION« to select TUNER as the input source.
Press »BAND« to select the frequency band (FM or MW).
Set the desired radio station by briefly pressing »
– Display: the frequency changes in steps of 50 kHz
or
press » « or » « and hold down until the frequency changes to the fast search.
5 a s 6
– The search stops when a radio station is found with a sufficiently strong signal.
Call up the store function with »PROGRAM«.
– Display: »MEMORY«, the preset position »01« flashes.
Select the desired preset position (FM: 01-30, MW: 01-10) with
To store the radio station, press »PROGRAM«.
– Display: the preset position, the wave band and the frequency.
To store more radio stations, repeat steps
« or » s 6 « and confirm with »PROGRAM«.
« or » s 6 « and confirm with »PROGRAM«.
to 6.
3
5 a « or » s 6 « and confirm with
« or » « repeatedly.
5 a s 6
»– DIR/PRESET +
«.