General Functions; Switching On And Off; Selecting The Input Source; Adjusting The Volume - Grundig Ovation 3 Instruction Manual

Hifi music center
Table of Contents

Advertisement

GENERAL FUNCTIONS

Switching on and off

The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug from the
wall socket.
1
Switch on the hi-fi system from standby mode
by pressing »
8
« on the remote control or on
the hi-fi system.
– The system switches to the last selected
source.
2
Switch the hi-fi system to standby mode by
8
pressing »
« on the remote control or on the
hi-fi system.
– Display: the current time and date.

Selecting the input source

1
Press »MODE« and rotate the Jog-Shuttle to
select »FM TUNER«, »AUX«, »CD«, »SD«, »USB«
on display and confirm by pressing on the
Jog-Shuttle;
– Display: »FM TUNER«, »100.60
cy of the radio station), »AUX«, »CD«, »SD«
or »USB«.

Adjusting the volume

1
Press »VOL«, confirm by pressing on Jog-
Shuttle and rotate the Jog-Shuttle to adjust the
volume;
or
during playback, rotate the Jog-Shuttle to
adjust volume.
– Display: briefly from »VOL MIN« to »VOL MAX«.

Selecting sound settings

You can choose between different preset sound
settings.
1
Press consecutively »DSC/UBS« on the
remote control to select the sound setting from
»USER«, »CLASSIC«, »POP«, »JAZZ«, »ROCK«
and »EQ OFF« .
– Display: »
«, »
«, »EQ OFF«.
»
18
ENGLISH
« (frequen-
MHz
« »
«, »
«,
---------------------------------------------------------------------------------------

Setting the equaliser

The user sound setting allows you to make your
own personal equaliser settings.
1
Briefly press »DSC/UBS« until »USER« is
shown on the display and confirm by pressing
on the Jog-Shuttle.
– Display: »BASS«.
2
Confirm bass by pressing on the Jog-Shuttle.
Set the value of bass by rotating the Jog-Shuttle
and confirm by pressing on it.
– Display: »TREBLE«.
3
Confirm treble by pressing on the Jog-Shuttle.
Set the value of treble by rotating the
Jog-Shuttle and confirm by pressing on it.
– Display: »BALANCE« and the value setting
scale.
4
Set the value of speaker balance by rotating
the Jog-Shuttle and confirm by pressing on it.
Note:
If you do not press any button for 5 seconds,
7
the hi-fi system will automatically quit the
setting.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cds 8120

Table of Contents