Jitter Test; Network Requirements - H3C S5100-SI Operation Manual

Operation sequence errors: 0
Other operation errors: 0
Http result:
DNS Resolve Time: 0
DNS Resolve Min Time: 0
DNS Resolve Max Time: 0
DNS Resolve Failed Times: 0
DNS Resolve Timeout Times: 0
TCP Connect Time: 73
TCP Connect Min Time: 5
TCP Connect Max Time: 20
TCP Connect Timeout Times: 0
[Sysname-hwping-administrator-http] display hwping history administrator http
HWPing entry(admin administrator, tag http) history record:
Index
1
2
3
4
5
6
7
8
9
10
For detailed output description, see the corresponding command manual.
For an HTTP test, if configuring the destination address as the host name, you must configure the IP
address of the DNS server to resolve the host name into an IP address, which is the destination IP
address of this HTTP test.

Jitter Test

Network requirements

Both the HWPing client and the HWPing server are H3C S5100-SI/EI series Ethernet switches. Perform
a HWPing jitter test between the two switches to test the delay jitter of the UDP packets exchanged
between this end (HWPing client) and the specified destination end (HWPing server).
Response Status
13 1
9 1
3 1
3 1
3 1
2 1
3 1
3 1
2 1
2 1
Drop operation number: 0
HTTP Operation Time: 675
HTTP Test Total Time: 748
HTTP Transmission Successful Times: 10
HTTP Transmission Failed Times: 0
HTTP Transmission Timeout Times: 0
HTTP Operation Min Time: 27
HTTP Operation Max Time: 80
LastRC Time
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.5
0 2000-04-02 15:15:52.4
0 2000-04-02 15:15:52.4
0 2000-04-02 15:15:52.4
0 2000-04-02 15:15:52.4
0 2000-04-02 15:15:52.4
1-22