Ftp Test - H3C S5100-SI Operation Manual

Min/Max/Average Round Trip Time: 1018/1037/1023
Square-Sum of Round Trip Time: 10465630
Last complete test time: 2000-4-3 9:51:30.9
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
[Sysname-hwping-administrator-dhcp] display hwping history administrator dhcp
HWPing entry(admin administrator, tag dhcp) history record:
Index Response
1
2
3
4
5
6
7
8
9
10
For detailed output description, see the corresponding command manual.
You can perform a HWPing DHCP test only when no DHCP client is enabled on any interface.
Otherwise, the DHCP Server sends the response to an interface enabled with the DHCP Client rather
than to the source interface, thus resulting in HWPing DHCP test failure.

FTP Test

Network requirements
Both the HWPing client and the FTP server are H3C S5100-SI/EI series Ethernet switches. Perform a
HWPing FTP test between the two switches to test the connectivity to the specified FTP server and the
time required to upload a file to the server after the connection is established. Both the username and
password used to log in to the FTP server are admin. The file to be uploaded to the server is
cmdtree.txt.
Status LastRC
1018 1
1037 1
1024 1
1027 1
1018 1
1020 1
1018 1
1020 1
1020 1
1028 1
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Time
0 2000-04-03 09:51:30.9
0 2000-04-03 09:51:22.9
0 2000-04-03 09:51:18.9
0 2000-04-03 09:51:06.8
0 2000-04-03 09:51:00.8
0 2000-04-03 09:50:52.8
0 2000-04-03 09:50:48.8
0 2000-04-03 09:50:36.8
0 2000-04-03 09:50:30.8
0 2000-04-03 09:50:22.8
1-18