H3C S5100-SI Operation Manual page 732

To do...
Enter system view
Enable the HWPing client
function
Create a HWPing test group
and enter its view
Configure the destination IP
address
Configure the destination port
Configure the source IP
address
Configure the source port
Configure the test type
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the packet size
Configure the automatic test
interval
Configure the probe timeout
time
Use the command...
system-view
hwping-agent enable
hwping administrator-name
operation-tag
destination-ip ip-address
destination-port
Port-number
source-ip ip-address
source-port port-number
test-type jitter
count times
history-records number
datasize size
frequency interval
timeout time
1-9
Remarks
—
Required
By default, the HWPing client
function is disabled.
Required
By default, no test group is
configured.
Required
The destination address must
be the IP address of a UDP
listening service on the
HWPing server.
By default, no destination
address is configured.
Required
The destination port must be
the port of a UDP listening
service on the HWPing server.
By default, no destination port
is configured.
Optional
By default, no source IP
address is configured.
Optional
By default, no source port is
configured.
Required
By default, the test type is
ICMP.
Optional
By default, each test makes
one probe.
Optional
By default, the maximum
number is 50.
Optional
By default, the packet size is 68
bytes.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Optional
By default, a probe times out in
three seconds.