H3C S5100-SI Operation Manual page 670

To do...
Enable system information
output to the console
Configure the output rules
of system information
Set the format of time
stamp in the output
information
To view the debugging information of some modules on the switch, you need to set the type of the
output information to debug when configuring the system information output rules, and use the
debugging command to enable debugging for the corresponding modules.
Table 1-4 Default output rules for different output directions
Output Modules
direction allowed
default (all
Console
modules)
Monitor default (all
terminal modules)
default (all
Log host
modules)
default (all
Trap buffer
modules)
default (all
Log buffer
modules)
default (all
SNMP NMS
modules)
Enabling system information display on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Use the command...
info-center console
channel { channel-number |
channel-name }
info-center source
{ modu-name | default }
channel { channel-number |
channel-name } [ { log | trap |
debug } { level severity |
state state } ]*
info-center timestamp { log
| trap | debugging } { boot |
date | none }
LOG
Enable
Severit Enabled/
d/disab
y disabled
led
warning
Enabled Enabled
s
warning
Enabled Enabled
s
informati
Enabled Enabled
onal
Disable informati
Enabled
d onal
warning
Enabled Disabled
s
Disable debuggi
Enabled
d ng
1-9
Remarks
Optional
By default, the switch uses
information channel 0 to output
log/debugging/trap information to the
console.
Optional
Refer to Table 1-4 for the default
output rules of system information.
Optional
By default, the time stamp format of
the log and trap output information is
date, and that of the debugging
output information is boot.
TRAP
Enabled/
Severity
disabled
debuggin
Enabled
g
debuggin
Enabled
g
debuggin
Disabled
g
warnings Disabled
debuggin
Disabled
g
warnings Disabled
DEBUG
Severity
debuggin
g
debuggin
g
debuggin
g
debuggin
g
debuggin
g
debuggin
g