H3C S5100-SI Operation Manual page 548

Operation
Specify the VLANs to be
allowed to pass the Ethernet
port
Table 2-20 Configure multicast VLAN on the Layer 2 switch
Operation
Enter system view
Enable IGMP Snooping
Enter VLAN view
Enable IGMP Snooping
Enable multicast VLAN
Return to system view
Enter Ethernet port view for the
Layer 3 switch
Define the port as a trunk or
hybrid port
Specify the VLANs to be
allowed to pass the Ethernet
port
Enter Ethernet port view for a
user device
Define the port as a hybrid port
Specify the VLANs to be
allowed to pass the port
Command
port hybrid vlan vlan-id-list
{ tagged | untagged }
port trunk permit vlan vlan-list
Command
system-view
igmp-snooping enable
vlan vlan-id
igmp-snooping enable
service-type multicast
quit
interface interface-type
interface-number
port link-type { trunk |
hybrid }
port hybrid vlan vlan-list
{ tagged | untagged }
port trunk permit vlan vlan-list
interface interface-type
interface-number
port link-type hybrid
port hybrid vlan vlan-id-list
{ tagged | untagged }
2-14
Remarks
Required
The multicast VLAN defined on
the Layer 2 switch must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN
if the port type is hybrid.
Remarks
—
—
—
Required
Required
—
—
Required
Required
The multicast VLAN must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN
if the port type is hybrid.
—
Required
Required
The multicast VLAN must be
included, and the port must be
configured to forward tagged
packets for the multicast VLAN.