H3C S5100-SI Operation Manual page 291

Ethernet switches
Hide thumbs Also See for H3C S5100-SI:
Table of Contents

Advertisement

Authentication: RADIUS, local, or HWTACACS.
Follow these steps to configure separate AAA schemes:
To do...
Enter system view
Create an ISP domain and
enter its view, or enter the view
of an existing ISP domain
Configure an authentication
scheme for the ISP domain
Configure an authorization
scheme for the ISP domain
Configure an accounting
scheme for the ISP domain
RADIUS scheme and local scheme do not support the separation of authentication and authorization.
Therefore, pay attention when you make authentication and authorization configuration for a domain:
When the scheme radius-scheme or scheme local command is executed and the authentication
command is not executed, the authorization information returned from the RADIUS or local scheme still
takes effect even if the authorization none command is executed.
Configuration guidelines
Suppose a combined AAA scheme is available. The system selects AAA schemes according to the
following principles:
If authentication, authorization, accounting each have a separate scheme, the separate schemes
are used.
If you configure only a separate authentication scheme (that is, there are no separate authorization
and accounting schemes configured), the combined scheme is used for authorization and
accounting. In this case, if the combined scheme uses RADIUS or HWTACACS, the system never
uses the secondary scheme for authorization and accounting.
If you configure no separate scheme, the combined scheme is used for authentication,
authorization, and accounting. In this case, if the system uses the secondary local scheme for
authentication, it also does so for authorization and accounting; if the system uses the first scheme
for authentication, it also does so for authorization and accounting, even if authorization and
accounting fail.
Use the command...
system-view
domain isp-name
authentication
{ radius-scheme
radius-scheme-name [ local ] |
hwtacacs-scheme
hwtacacs-scheme-name
[ local ] | local | none }
authorization { none |
hwtacacs-scheme
hwtacacs-scheme-name }
accounting { none |
radius-scheme
radius-scheme-name |
hwtacacs-scheme
hwtacacs-scheme-name }
2-5
Remarks
Required
Optional
By default, no separate
authentication scheme is
configured.
Optional
By default, no separate
authorization scheme is
configured.
Optional
By default, no separate
accounting scheme is
configured.

Advertisement

Table of Contents
loading

This manual is also suitable for:

H3c s5100-ei

Table of Contents