HTTP redirection
In the HTTP redirection approach, when the terminal users that have not passed 802.1x
authentication access the Internet through Internet Explorer, they are redirected to a
predefined URL for EAD client download.
The two functions ensure that all the users without an EAD client have downloaded and
installed one from the specified server themselves before they can access the Internet,
thus decreasing the complexity and effort that EAD client deployment may involve.
The quick EAD deployment feature takes effect only when the access control mode of an
802.1x-enabled port is set to auto.
Configuring Quick EAD Deployment
Configuration Prerequisites
Enable 802.1x on the switch.
Set the access mode to auto for 802.1x-enabled ports.
Configuration Procedure
Configuring a free IP range
A free IP range is an IP range that users can access before passing 802.1x authentication.
Follow these steps to configure a free IP range:
To do...
Enter system view
Configure the URL for
HTTP redirection
Configure a free IP range
Use the command...
system-view
dot1x url url-string
dot1x free-ip ip-address
{ mask-address |
mask-length }
2-2
Remarks
—
Required
Required
By default, no free IP
range is configured.