Turning The Power On/Off; Daily Care; How To Turn The Power On; Operational - Fujitsu fi-7160 Operator's Manual

Chapter 1 Scanner Overview

1.3 Turning the Power ON/OFF

This section explains how to power on/off the scanner.
HINT
The method by which the scanner is powered on/off can be specified
from one of the following:
 Press the [Power] button on the operator panel
 Use an AC power strip to control power supply for peripherals such
as a scanner in accordance with the computer's power.
 Turn on/off the scanner in accordance with the computer's power.
For details, refer to "Method of Turning the Scanner ON/OFF [Power
SW Control]" (page 185).

How to Turn the Power ON

1
Press the [Power] button on the operator panel.
 The scanner is turned on, and the [Power] button lights in green.
During initialization, the following image is displayed on the LCD of
the operator panel.
The scanner is ready to scan when [Ready] is displayed.
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan

Daily Care

Replacing the
Consumables
[Power] Button
Troubleshooting

Operational

Settings
Appendix
Glossary
TOP
19