Cropping The Image Boundary [Autocrop Boundary] - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 9 Operational Settings
Cropping the Image Boundary
[AutoCrop Boundary]
Some fractional data may be generated in the images in the
process of scanning. You can specify whether to include or
exclude such fractional data by using the "AutoCrop
Boundary" function.
1
Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page
2
From the listing on the left, select [Device Setting 2]
[AutoCrop Boundary].
3
Select whether to include or exclude the fractional data.
Select [Optimize] to prevent any exclusion of fractional data from
scanned images.
While selecting [Optimize] can prevent data loss, it
may also generate black lines near the right edge.
When you scan a document with text near the right
edge while [Round Down] is selected, some pixel data
there may be lost.
For details about setting automatic page size
detection, refer to
153).
Images" (page
This setting is only applied in black & white mode.
"Automatically Correcting Skewed
91).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
176