Disable The Interrupt Function - Oce VarioPrint 2062 NC User Manual

Disable the Interrupt function

Disable the Interrupt function
Introduction
The Interrupt function allows users to suspend a large job, so that a new job can be
started. The suspended job continues, when the new jobs are completed and the user
resumes the suspended job.
You can disable the Interrupt function, when the Interrupt function proves to be
unacceptable to the users.
Before you begin
Enter the Key operator system
page 28).
Note: When a Copy control device or an external finisher is installed, the Interrupt
function does not work.
Illustration
[60]
[60] Disable the Interrupt function
How to disable the Interrupt function
Press the 'Machine' key.
1.
Select the 'Console defaults' tab.
2.
Press the 'Interrupt mode' key to select 'Disabled'.
3.
Check
Quit the Key operator system.
1.
To check the selection, make a test copy job.
2.
80 Chapter 10 The Interrupt Mode
(see 'Enter or quit the key operator system' on