Stop Automatic Printing - Oce VarioPrint 2062 NC User Manual

Stop automatic printing

Stop automatic printing
Introduction
You can stop automatic printing, to allow the processing of copy, mailbox or scan
jobs. The automatic print jobs remain in the print queue. To resume the printing of
the automatic print jobs, restore the setting in the key operator system.
The users can still initiate automatic print jobs when automatic printing has been
stopped.
Before you begin
Enter the Key operator system
page 28).
Note: The Océ VarioPrint
so that all print jobs are stored in the mailbox.
Controlling automatic printing
Press the 'Print settings' key.
1.
Select the 'Maintenance' tab.
2.
Press the 'Automatic printing' key to select 'Stop' or 'Continue'.
3.
Illustration
[116]
[116] Stop automatic printing
Check
Exit the key operator system.
1.
To check the selection, start a print job.
2.
Enter the settings for an automatic print job in the Océ VarioPrint
printer driver.
The automatic print job is not printed until you again change the setting to continue
the automatic printing.
152 Chapter 18 Troubleshooting on the Network Printer
(see 'Enter or quit the key operator system' on
®
2062/75 NC allows you to prevent automatic printing,
®
2062/75 NC