Oce VarioPrint 2062 NC User Manual page 131

[25]
Configuration
mode
'Separation'
'Production'
Check
Quit the Key operator system.
1.
Check to see that both finisher bins are empty.
2.
Create a copy job to check the selection.
3.
If 'Production' is selected, the copy job is directed to the upper finisher bin.
If 'Separation' is selected, the copy job is directed to the lower finisher bin.
Result
The lower finisher bin collects the output of the mailbox jobs
and copy jobs.
The upper finisher bin collects the output of the automatic
print jobs.
The upper and the lower bins are linked.
First, the output of all jobs is sent to the upper bin. Then,
when the upper bin is full, the lower bin is filled.
Direct the output to the finisher bins
131