Oce VarioPrint 2062 NC User Manual page 63

Illustration
[50]
[50] Enable the copy control device
Configuring the copy control device
Press the 'Accounting' key.
1.
Select the 'General' tab.
2.
Press the 'Copy control device' key to select 'Enabled'.
3.
Check
Quit the Key operator system.
1.
To check the selection, make a test job.
2.
Open the Accounting system, to see if the test job is charged to the Copy control
device account.
Enable the Copy control device connected to the Digital Copier
63