Restart the controller
Introduction
You are requested to restart the controller to solve some errors. If an error occurs, the
Océ VarioPrint
Before you begin
Enter the Key operator system
page
28).
Illustration
[118]
[118] Restarting the controller
How to restart the system
Press the 'Print settings' key.
1.
Select the 'Maintenance' tab.
2.
Press the 'Controller' key to select 'Restart'.
3.
Check
Quit the key operator system.
1.
To check, make sure that the problems have been solved.
2.
®
2062/75 NC reports that a restart of the controller is necessary.
(see 'Enter or quit the key operator system' on
Restart the controller
155