Shut down the Network Printer system
Shut down the Network Printer system
Introduction
You can shut down the system, for example to move the Océ VarioPrint
NC to another room. This procedure makes the system shut down in a controlled
way.
Before you begin
Make sure that no job is announced or in progress.
1.
Enter the Key operator system
2.
page
28).
Illustration
[108]
[108] The power switch
[109]
[109] Stop the controller
How to shut down the Network Printer system
Enter the Key Operator System.
1.
Press the 'Print settings' key.
2.
Select the 'Maintenance' tab.
3.
Press the 'Controller' key to select 'Stop'.
4.
Press the power switch to the '0' position.
5.
144
Chapter 16 Maintaining the Machine
(see 'Enter or quit the key operator system' on
®
2062/75