Define The Job Charges Of The Digital Copier - Oce VarioPrint 2062 NC User Manual

Define the job charges of the Digital Copier

Define the job charges of the Digital Copier
Introduction
The Océ VarioPrint
that is copied. You can define the charge for the following output.
2-sided output. Select a factor.
A3/Tabloid 11x17 output. Select a factor.
Blank page. Select 'Yes' or 'No'.
The default setting is no charge for blank pages of any size. The user must identify
the blank pages in the display screen menu.
The charges are passed on to the Accounting system and the Copy control device.
Before you begin
Enter the Key operator system
page 28).
Illustration
[48]
[48] Define the job charges
Defining the job charge for 2-sided output
Press the 'Accounting' key.
1.
Select the 'Charges' tab.
2.
Press the '2-sided output' key to select '1' or '2'.
3.
How to define the job charge for A3/Tabloid 11x17 output
Press the 'Accounting' key.
1.
Select the 'Charges' tab.
2.
Press the '11x17 output' key to select '1' or '2'.
3.
60 Chapter 7 The Access Security
®
2062/75 NC default charge is one click for each job page side
(see 'Enter or quit the key operator system' on