Link The Paper Trays - Oce VarioPrint 2062 NC User Manual

Link the paper trays

Introduction
To increase the available paper stock for the jobs, you can link one or more paper
trays. When a tray gets empty during a job, paper will be used from the linked paper
tray or trays. The paper trays that are linked must contain paper with the same size
and orientation.
The following tray linking is possible, depending on the configuration of the
machine.
'Trays 4, 1'
'Trays 4, 2'
'Trays 4, 3'
'Trays 4, 1, 2'
'Trays 4, 1, 3'
'Trays 1, 2'
'Trays 1, 3'
For example: 'Trays 4, 2' means that the job will first use paper from tray 4. When
tray 4 is empty, the job will continue and will use paper from tray 2.
Before you begin
Enter the Key operator system
page 28).
Illustration
[58]
[58] Link the paper trays
Linking the paper trays
Press the 'Machine' key.
1.
Select the 'Paper trays' tab.
2.
Press the 'Link paper trays' key to select the series of values.
3.
Use the scroll wheel to select the tray or trays.
(see 'Enter or quit the key operator system' on
Link the paper trays
75