Defining The Folio Size - Oce VarioPrint 2062 NC User Manual

Defining the Folio Size

Defining the Folio Size
Introduction
Paper tray 1, which is adjustable for different paper sizes, can detect the dimensions
of the paper with the exception of Folio and Foolscap folio. The difference between
the two folio sizes is not be detected. Therefore, you must indicate which type is
placed in tray 1. The automatic document feeder can detect the different folio sizes.
The Océ VarioPrint
'Folio' (12.4 x 8.4 inches).
'Foolscap folio' (13.2 x 8.12 inches).
'Folio' is the default setting. If the users require jobs on Foolscap folio paper, change
the setting for these jobs.
Before you begin
Enter the Key operator system
page 28).
Illustration
[57]
[57] Changing the Folio Size
How to change the folio size
Press the 'Machine' key.
1.
Select the 'Special' tab.
2.
Press the 'Folio type' key to select 'Folio' or 'Foolscap folio'.
3.
Check
Exit the key operator system.
1.
To check the selection, make a test copy job. Use an original of the selected Folio
2.
size.
The original information must fit correctly on the copy page.
74 Chapter 9 The Page and Paper Settings
®
2062/75 NC supports the following folio sizes:
(see 'Enter or quit the key operator system' on