Delete the jobs
Delete the jobs
Introduction
If there are problems with the job transfer, an excessive load can be placed on the
system. You can delete the jobs to regain space.
Before you begin
Enter the Key operator system
page
28).
Attention: You cannot reverse the delete actions.
Illustration
[119]
[119] Delete the scan jobs
Deleting the jobs
Press the 'Print settings' key.
1.
Select the 'Maintenance' tab.
2.
Press the 'Delete jobs' key to select 'Print jobs' or 'Scan jobs'.
3.
Press the start key
4.
Check
Exit the key operator system.
1.
Check to insure that the problems have been solved.
2.
156
Chapter 18 Troubleshooting on the Network Printer
(see 'Enter or quit the key operator system' on
to confirm.