Disabling The Automatic Switch Off - Oce VarioPrint 2062 NC User Manual

Disabling the Automatic Switch Off

Introduction
You can disable the automatic switch off if the maximum settings prove to be
unacceptable to the users
on page 106).
Océ Service must reconfigure the system so that you can disable the automatic
switch off.
Before you begin
Enter the Key operator system
page 28).
Illustration
[76]
[76] Automatic Switch Off is Enabled
How to disable the automatic switch off
Press the 'Machine' key.
1.
Select the 'Special' tab.
2.
Press the 'Automatic switch-off' key to select 'Disabled'.
3.
Check
Quit the Key operator system.
1.
Check to see if the timer is disabled.
2.
The machine will not be switched off after the expiration of the automatic switch off
time.
(see 'About the energy save modes of the Digital Copier'
(see 'Enter or quit the key operator system' on
Disabling the Automatic Switch Off
109