Enable The Copy Control Device Connected To The Network Printer - Oce VarioPrint 2062 NC User Manual

Enable the Copy control device connected to the Network Printer

Enable the Copy control device connected to the Network
Printer
Introduction
The copy control device is connected externally to the machine. The system gives
access to external users who are not authorized in the accounts database. The
external user must insert coins or a credit card to gain access to the machine.
Océ Service must install and configure the Copy control device.
You can enable or disable an installed and configured copy control device.
An enabled Copy control device and an access-secured system
access-secured system of the Network Printer' on page
enable use by internal and external user groups.
[44]
[44] Entry screen for external users
The following table displays the requirements for the external users when the copy
control device is enabled:
54 Chapter 7 The Access Security
(see 'About the
46) can be combined, to