Oce VarioPrint 2062 NC User Manual page 35

[10]
Address assignment
'Manual'
'Use DHCP'
'Use BootP'
Defining the IP address manually
Press the 'Print settings' key.
1.
Select the 'Network' tab.
2.
Check that 'Manual' is selected in the 'Obtain IP address' box.
3.
Press the IP address key.
4.
Use the numeric keys to enter the IP address. You can use the scroll wheel to
5.
navigate.
Press the start key
6.
How to define the Subnet mask manually
Press the 'Print settings' key.
1.
Select the 'Network' tab.
2.
Check that 'Manual' is selected in the 'Obtain IP address' box.
3.
Press the 'Subnet mask' key.
4.
Use the numeric keys to enter the Subnet mask. You can use the scroll wheel to
5.
navigate.
Press the start key
6.
How to define the Default gateway manually
Press the 'Print settings' key.
1.
Select the 'Network' tab.
2.
Check that 'Manual' is selected in the 'Obtain IP address' box.
3.
Press the 'Default gateway' key.
4.
Use the numeric keys to enter the Default gateway. You can use the scroll wheel to
5.
navigate.
Press the start key
6.
Enter the IP address information of the Network Printer
Result
The IP address must be entered manually in the 'IP
address' box.
DHCP is used to obtain the IP address.
BootP is used to obtain the IP address.
to confirm the IP address.
to confirm the Subnet mask.
to confirm the Default gateway.
35