Oce VarioPrint 2062 NC User Manual page 20

The operator panel of the Network Printer
Number
7
8
9
10
11
12
13
14
15
20 Chapter 2 Getting to know the Océ VarioPrint® 2062/75 NC
Part
Correction key
Fingerprint sensor
Start key
Stop key
Numeric keys
USB port
Lower function keys
Wizards key
Main keys
Description
Use the key to:
Reset the number of sets to 1 (copy jobs)
or the value as defined in the printer driver
(print jobs).
Delete the last digit when you enter a
code.
Use the sensor for TouchTo Print
(fingerprinting).
Use the key to:
Starting a job.
Confirm the changes.
Use the key to:
Stop a job.
Finish your jobs when you must enter a
PIN to get access to the settings. When
you do not stop the jobs with the Stop key,
an other user can start jobs that are
charged to your user account.
Use the keys to:
Enter a code or a PIN.
Entering the number of sets.
Use the USB port to insert a USB stick
(Pocket mailbox function).
Use the keys to:
Select a collection of settings.
Perform a task.
Select a value or a function.
Use the key to go to the wizards.
The Network Printer has several main keys.
The 'Print' key to go to the print settings.
The 'Copy' key to go to the copy settings.
The 'Scan' key to go to the scan settings.