Direct the output to the finisher bins
Direct the output to the finisher bins
Introduction
You can direct the output of a mailbox job, an automatic print job and a copy job to
an indicated bin of the finisher.
The output will be sent to the selected bin. If there is not enough capacity to complete
the job, a message is displayed to explain the problem. The user must remove the
paper stacks, to resume the job.
Before you begin
Enter the Key operator system
page
28).
Illustration
[91]
[91] Changing the Finisher Bin Configuration
How to direct the output to the finisher bins
Press the 'Machine' key.
1.
Select the 'Special' tab.
2.
Press the 'Finishing jobs' key to select the 'Finisher control' values.
3.
Use the scroll wheel to select 'Separation' or 'Production'.
4.
130
Chapter 15 Finishing Jobs
(see 'Enter or quit the key operator system' on