Change The Account-Log Mode - Oce VarioPrint 2062 NC User Manual

Change the account-log mode

Introduction
The account-log feature traces and records the job information. The Account-log
feature is job-based and does not require any access control. The information is
stored and can be downloaded when you run the Océ System Configuration. When
a job is ready, the information about the job is stored on the controller.
The Account-log system has two modes to manage the job information storage when
the job processing stops.
Print the System log file, for information about any errors that have occurred.
To change the account-log mode, proceed as follows:
When the job processing is stopped, the machine automatically sets the mode to
'Hold jobs'.
The mode 'Hold jobs' is also selected when the machine is switched off and on again.
Before you begin
Enter the Key operator system
page 28).
Illustration
[117]
[117] Change the account-log mode
Changing the account-log mode
Press the 'Accounting' key.
1.
Select the 'Database' tab.
2.
Press the 'Account log error' key to select 'Ignore error' or 'Hold jobs'.
3.
(see 'Enter or quit the key operator system' on
Change the account-log mode
153