Changing The Status - Oce VarioPrint 2062 NC User Manual

Changing the Status

Introduction
You can change the status of the user account, to enable or disable the access to the
machine when the access is secured.
If the status is closed (-), the user account is invalid.
If the status is open (+), the user account is valid.
Before you begin
Enter the Key operator system
page 28).
Illustration
[82]
[82] Changing the Status
Changing the status of a user account
Press the 'Accounting' key.
1.
Select the 'Account' tab.
2.
Use the scroll wheel to select the record of the user account.
3.
Press the 'Change status' key to change the status.
4.
(see 'Enter or quit the key operator system' on
Changing the Status
119