Maintenance And Configuration On The Network Printer - Oce VarioPrint 2062 NC User Manual

Maintenance and configuration on the Network Printer

Maintenance and configuration on the Network Printer
Introduction
The Network Printer is a copier and scanner, but most of all it is a printer. It offers
the same functions any desktop printer offers, and lots more. The operator panel is
user friendly and easy to operate.
You as Key operator are responsible for the machine supplies and the configuration
of the system through the Key operator system
2062/75 NC users' on page
system.
What to do as a Key operator of Network Printer
As a Key operator you are responsible to set the initial configuration. You are
advised to read this manual carefully to decide which settings are important for your
organization or department.
Remember that most of the network, server and security configuration must be done
through the Océ System configuration. Refer to the System Administration Manual
how to use the Océ System Configuration
VarioPrint® 2062/75 NC' on page
Applications
There are two applications to configure the Network Printer.
[5]
Applications
Key operator system
Océ System Configuration
16 Chapter 2 Getting to know the Océ VarioPrint® 2062/75 NC
(see 'Who are the Océ VarioPrint®
13). You need a password to enter the Key operator
(see 'More information on the Océ
14).
Description
The display screen provides access to the Key
operator system.
You need a Key operator password to open the
Key operator system.
The web based Océ System Configuration
provides the settings for the system, machine
and network configuration.
You need a System administrator password to
start the application.
Note: There are settings that can
be found in both the Key operator
system and the Océ System
Configuration application.