Control the Interrupt mode
Disable the interrupt mode
Introduction
The interrupt mode allows users to suspend a large job so that a new job can
be started. The suspended job continues after the new jobs are completed and
the user exits the interrupt mode.
You can disable the interrupt mode if the interrupt mode proves to be
unacceptable to the users.
Before you begin
Enter the key operator system.
1.
If a copy control device or an external finisher is installed, the interrupt
Note:
mode does not work.
Illustration
[42] Disable the interrupt mode
[42] Disable the interrupt mode
Disabling the interrupt mode
Activate the 'Machine' section.
1.
Open the 'Console defaults' card.
2.
Press the 'Interrupt mode' function key to select 'Disabled' .
3.
Control the print mode
75