Disable The Interrupt Mode - Oce VarioPrint 2045-65 DC Configuration And Maintenance Manual

Disable the interrupt mode

Introduction
The interrupt mode allows users to suspend a large job so that a new job can be
started. The suspended job continues after the new jobs are completed and the
user exits the interrupt mode.
You can disable the interrupt mode if the interrupt mode proves to be
unacceptable to the users.
Before you begin
Enter the key operator system.
1
If a copy control device or an external finisher is installed, the interrupt
Note:
mode does not work.
Illustration
[28] Disable the interrupt mode
[28] Disable the interrupt mode
Disabling the interrupt mode
Activate the 'Machine' section.
1
Open the 'Console defaults' card.
2
Press the 'Interrupt mode' function key to select 'Disabled' .
3
Check
Exit the key operator system.
1
To check the selection, make a test copy job.
2
Press the interrupt key
mode is not entered.
54 Océ VarioPrint 2045-65 DC Configuration and maintenance manual
after the first set has been printed. The interrupt