Change the default margin shift
Introduction
The margin shift is the distance that the margin is moved to the right or to the left of
the page.
The default margin shift is .48 inches. To change the default value, enter a value from
+ 1 inch (left direction) down to - 1 inch (right direction).
Before you begin
Enter the Key operator system
page
28).
Illustration
[59]
[59] Define the default margin shift
Changing the default margin shift
Press the 'Machine' key.
1.
Select the 'Console defaults' tab.
2.
Use the scroll wheel to adjust the default margin shift.
3.
Check
Exit the key operator system.
1.
To check the selection, make a test copy job.
2.
Check that the default margin shift is set for your needs.
(see 'Enter or quit the key operator system' on
Change the default margin shift
77